FRONT SUSPENSION CROSSMEMBER > THREE-DIMENSIONAL DISTANCE


HINT:
  1. Point C, c on the vehicle are asymmetrical.
  2. In cases in which only one dimension is given, left and right are symmetrical.
  1. For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).


Measuring Point Name 
Symbol
Name
Hole Diameter
mm (in.)
A, a
Front Suspension Lower Arm Installation Hole
φ17.5 (0.69)
B, b
Front Suspension Crossmember Installation Hole (Lower)
φ22 (0.87)
C, c
Front Suspension Crossmember Standard Hole
φ12 (0.47)
D, d
Steering Gear Box Installation Hole
φ17 (0.67)
E, e
Front Suspension Lower Arm Installation Hole
21X18.5 (0.83X0.73)
F, f
Front Suspension Crossmember Installation Hole
φ22 (0.87)

K100463E01